Motorola XTS2500 User Manual download pdf (Page 28)

General Radio Operation

Receive / Transmit

Radio users who switch from analog to digital radios often assume

that the lack of static on a digital channel is an indication that the radio

is not working properly. This is not the case. Digital technology quiets

the transmission by removing the “noise” from the signal and allowing

only the clear voice or data information to be heard.

This section emphasizes the importance of knowing how to monitor a

channel for traffic before keying-up to send a transmission.

Without Using the Volume Set and Monitor Buttons

1 Turn the radio on and select

the desired zone and

channel.

2 Listen for a transmission.

3 Adjust the Volume Control

knob if necessary.

4 Press and hold the PTT

button to transmit. The LED

lights RED while

transmitting.

5 Release the PTT button to

receive (listen).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 77 78

No comments

Motorola XTS2500 User Manual Page 28