Motorola StarMax Installation Manual download pdf (Page 16)

Chapter 2

Power Macintosh 5400, 5500, and Performa 54XX

Crescendo/L2 Installation

Install Software

1. If you are upgrading to Mac OS 9 as part of this installation,

do so now. Sonnet recommends a clean/universal install of the

Mac OS. Start up your computer from the Mac OS CD and double

click the Mac OS Install application. In the Select Destination window,

click the Options button and click the Perform Clean Installation

checkbox that appears in the subsequent screen. Click the Select

button. Proceed through the next several screens until you reach the

Install Software window. Click the Customize button. In the Custom

Installation and Removal window click the pop-up menu to the right

of Mac OS 9. Change the “Recommended Installation” to

“Customized installation.” The Select Mac OS 9 Features to Install

window will appear shortly. Change “Recommended Installation” to

“Universal Installation” from the pop-up menu. Click OK, Start, then

Continue to complete the installation. After the software is installed,

quit the Mac OS Install application and restart your computer.

2. Insert the Crescendo/Encore Install diskette into the floppy disk

drive. Double click the Crescendo/Encore Install icon. By default,

with “Easy Install” selected from the pop-up menu, the required

software will be installed into the active System Folder on the boot

drive. If this is ok, click the Install button; otherwise, select “Custom

Install” from the pop-up menu for more options or select another

drive to install the software. The installer will install the appropriate

software into the System Folder of your computer. If the installation

was successful, a dialog box will appear. Click Quit to leave the

installer and shut down your computer.

Shut Down and Open Computer

1. Shut down your Power Macintosh. If the computer has been on

for any length of time, wait a few minutes for it to cool before

beginning the installation.

2. Disconnect the power and peripheral cables from the back of the

computer and move it to an area where you can freely work.

Support Note:

We recommend that you make a backup of important

information on your hard drive prior to installing new hardware or

software. When handling computer products, you must take care to prevent

components from being damaged by static electricity. Avoid carpeted areas,

handle processor upgrade cards only by their edges, and avoid touching

connector traces and component pins.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 72 73

No comments

Motorola StarMax Installation Manual Page 16