Motorola MVME2600 Series User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
MVME2600 Details
PCI Expansion
MVME2600 modules have a 64-bit PCI connection to support
PCI expansion carriers such as Motorola PMCspan. Design
details for the connector and electrical specifications are
available from your local Motorola representative.
Memory Modules
The MVME2600 series has a modular memory design. Mez-
zanine arrays support up to 512MB of add-on DRAM. These
RAM200 expansion modules allow field upgrades of the
memory capacity and do not require additional VME slots.
Transition Modules
Two artwork variants of the MVME2600 are available. One
series provides backward compatibility with the MVME712M
transition module I/O. The other series accepts the
MVME761 transition module that features an additional sync/
async serial port, a 10/100BaseT interface, Fast 16-bit SCSI,
and an IEEE 1284 compatible parallel port.
MVME761
The MVME761 transition module provides industry-standard
connector access to the IEEE 1284 parallel port, a 10BaseT
or 100BaseT port via an RJ-45 connector, two DB-9 connec-
tors providing access to the asynchronous serial ports config-
ured as EIA-574 DTE, and two HD-26 connectors providing
access to the sync/async serial ports. These serial ports,
labeled as Serial 3 and Serial 4 on the face plate of the
MVME761, are individually user configurable as EIA-232,
EIA-530, V.35, or X.21 DCE or DTE via the installation of
Motorola Serial Interface Modules (SIMs).
A P2 adapter provides interface module signals to the
MVME761 transition module. The 3-row P2 adapter can be
used for 8-bit SCSI. A 5-row P2 adapter supports 16-bit SCSI
and PMC I/O.
MVME712M
The MVME712M transition module provides industry-stan-
dard connector access to the Centronics
®
parallel port, an
AUI port, and four DB-25 connectors providing access to the
asynchronous/synchronous serial ports jumper configurable
as EIA-232 DCE or DTE. A P2 adapter provides interface sig-
nals to the MVME712M transition module. The 3-row P2
adapter can be used for 8-bit SCSI.
To gain access to the additional user definable I/O pins pro-
vided via the 5-row VME64 extension connector, a special P2
adapter board is available. This adapter panel replaces the
traditional 3-row P2 adapter and extends its capability by pro-
viding access to the PMC I/O pins.
Several other variations of the MVME712M are available for
combinations of I/O and connectors.
Operating Systems and Real-Time Kernels
PCI to VME
Bridge
Tundra Universe
P1
PCI to ISA
Bridge
W83C553
PCI Local Bus—
A32/D64-bit
ISA Bus
—A16/D8-bit
PowerPC Bus
—A32/D64-bit
PCI Chipset
Bridge
Super I/O
National
87308
Floppy
Parallel Port
IEEE1284 or
Centronics
Serial 1
Sync Serial
Zilog 85230/8536
603 or 604
Serial 3 Serial 4
P2
Serial 2
RAM200
0 to 512MB
Expansion
ECC DRAM
4MB or 8MB FLASH
PMC I/O
1 PMC
Slot
64
64
64
10/100BaseT or AIU
PS/2 Mouse,
Keyboard
SCSI
NVRAM
RTC
MK48T59
64
L2 Cache
256KB
SNAPHAT
Battery
FLASH
1 MB
Two PLCCs
(Socketed)
16
Memory
Controller
x 2
PCI Expansion
SCSI-2 FAST
SYM 53C825A
Ethernet
DEC 21140
MVME2600 Details
Motorola Computer Group:
AIX
Integrated Systems, Inc.:
pSOSystem
Lynx Real-Time Systems, Inc.:
LynxOS
Microware Systems
Corporation:
OS-9
®
/OS-9000
Microtec:
VRTX32
Wind River Systems, Inc.:
VxWorks
®
Page view 1
1 2 3 4 5 6

Comments to this Manuals

No comments