Motorola 2.1 User Manual download pdf (Page 52)

Chapter 3: MOTOMESH Duo Hardware

Personality Plug

There are three available color coded personality plugs that can be attached to the select port.

•

Canopy Connect Part # 363344B01 (Black) – If a black plug is attached to the

Select port Motorola Canopy based PoE to power Canopy Subscriber Modules will

be sourced on the POE OPT port.

•

Standard PoE Part # 286335B01 (White) - If a white plug is attached to the Select

port 802.3af standards based PoE will be sourced on the POE OPT port.

•

Reset Part # 3863343B01 (Red) – If a red plug is attached to the Select port the

MOTOMESH Duo device will be reset to factory defaults.

Figure 3-4 Select Port

Standard / Canopy Connect PoE Plug Usage Information

Procedure 3-1 Personality Plug Usage Information

With the MOTOMESH Duo device powered off, connect an external PoE device to the POE OPT

port with the Ethernet cable provided.

Connect the Canopy Connect or Standards based 802.3af PoE Personality Plug to the Select

Port (shown above) AFTER the Ethernet cable has been connected to the desired external

device.

Apply power to the MOTOMESH Duo device.

3-5

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 134 135

No comments

Motorola 2.1 User Manual Page 52