June 2008 Edition 1725-36170-001 Version B VIEW Certified Configuration Guide Motorola RFS7000 Wireless Switch with AP300
Configuration Guide PN: 1725-36170-001_B.doc 10 When SpectraLink Wireless Telephones are configured for 802.11a mode: RFS7000>en RFS7000#conf t
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 11Configuring radio settings through the Web interface 1. Open the RFS7000 ap
Configuration Guide PN: 1725-36170-001_B.doc 12 7. Once the APs are adopted they should appear in the Access Port Radios screen in the Configurati
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 1311. Click the Rate Settings button. 12. In the Rate settings dialog box, s
Configuration Guide PN: 1725-36170-001_B.doc 14 For configuring power and data rate settings, please consult your facility’s RF site survey, design
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 15SSID,QoS and Security Settings Configuring SSID, QoS and security settings
Configuration Guide PN: 1725-36170-001_B.doc 16 Configuring SSID, QoS and security settings through the Web interface 1. Open the RFS7000 applet
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 175. To configure SSID, enter spectralink in the ESSID field. 6. To configur
Configuration Guide PN: 1725-36170-001_B.doc 18 8. To configure security, in the Encryption section select the WPA/WPA2-TKIP check box. 9. Click
Configuration Guide PN: 1725-36170-001_B.doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are tr
Motorola: RFS7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 3Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) C
Configuration Guide PN: 1725-36170-001_B.doc 4 Network Topology The following topology was used during VIEW Certification testing.
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 5Configuration Settings Installing a New Image The VIEW Certified firmware rel
Configuration Guide PN: 1725-36170-001_B.doc 6 Installing firmware through the Web interface 1. Open the RFS7000 applet by entering the IP address
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 79. In the navigation pane under Switch, click Configurations. 10. Click the
Configuration Guide PN: 1725-36170-001_B.doc 8 Installing the AP license through the CLI For the RFS7000 to adopt AP300s, a license has to be insta
Motorola: RFS 7000 Wireless Switch with AP300 PN: 1725-36170-001_B.doc 9Configuring the Wireless Switch from the Default Configuration Radio Setting
Comments to this Manuals