Motorola Modem SM56 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
If there is no IRQ line available for the SM56 disable one of the COM ports in the BIOS and use
it's IRQ.
Note: If you are using a Windows 95/98 DOS box application, the modem requires two IRQs.
Refer to the Troubleshooting section in this document, or to the on-line User's Guide for more
information on DOS application support. You can access the User's Guide through the SM56
modem Control Panel application.
Also, you must ensure that one of COM Port 2, 3, or 4 is available for the SM56, as follows:
1. Open the Windows Control Panel.
2. Double click the System icon.
3. Choose the Device Manager tab.
4. Expand the Ports (COM and LPT) branch to see which COM ports are already installed.
To install the SM56 so that it is accessible to older application software and DOS programs, the
modem needs to be installed on one of COM port 2, 3, or 4. If none of these ports are available,
you must disable one of them in the BIOS.
5 Understanding Sound Card Compatibility and Installing the SM56
Hardware
Note: This section applies only to Data/Fax/Speakerphone modems.
Before discussing modem board installation, let's review the optional sound card connections for
the SM56. Recall that SM56 Data/Fax/TAM modems do not support the sound subsystem, even
though you can record and play back answering machine messages through your sound card
using them.
Sound Card Compatibility:
The SM56 requires a sound card to use its speakerphone capabilities. The Data/Fax/TAM modem
requires the sound card for local message playback which occurs through the host PC bus, not via
external wire connections. For this reason there are typically no TAPI connectors or
speaker/microphone jacks provided on Data/Fax/TAM and Data/Fax modems. Instead, these
modems usually have a local call progress speaker mounted on them, while speakerphone
supporting modems do not (since they can be connected to the sound board).
Typically, there are two methods for interfacing the Data/Fax/TAM/Speakerphone modem to a
sound card:
Internal speaker/microphone TAPI connector/header
Microphone and Speaker jacks mounted on the modem board
TAPI Connector
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 21 22

Comments to this Manuals

No comments