Motorola W230a User's Guide download pdf (Page 6)

the small print

battery use & safety

IMPORTANT: HANDLE AND STORE BATTERIES PROPERLY TO AVOID INJURY OR

DAMAGE.

Most battery issues arise from improper handling of batteries, and particularly

from the continued use of damaged batteries.

DON’Ts

• Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the

form of your battery.

• Don’t let the phone or battery come in contact with water.

Water can get into the

phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them

checked by your carrier or contact Motorola, even if they appear to be working

properly.

• Don’t allow the battery to touch metal objects.

If metal objects, such as jewelry,

stay in prolonged contact with the battery contact points, the battery could become

very hot.

• Don’t place your battery near a heat source.

Excessive heat can damage the

phone or the battery. High temperatures can cause the battery to swell, leak, or

malfunction. Therefore:

•

not

dry a wet or damp battery with an appliance or heat source, such as a hair dryer

or microwave oven.

•

Avoid leaving your phone in your car in high temperatures.

DOs

• Do avoid dropping the battery or phone.

Dropping these items, especially on a hard

surface, can potentially cause damage.

• Do contact your service provider or Motorola if your phone or battery has

been damaged from dropping or high temperatures.

IMPORTANT: USE MOTOROLA ORIGINAL PRODUCTS FOR QUALITY ASSURANCE

AND SAFEGUARDS.

To aid consumers in identifying authentic Motorola batteries from

non-original or counterfeit batteries (that may not have adequate safety protection),

Motorola provides holograms on its batteries. Consumers should confirm that any battery

they purchase has a “Motorola Original” hologram.

Motorola recommends you always use Motorola-branded batteries and

chargers.

Motorola mobile devices are designed to work with Motorola batteries. If you

see a message on your display such as

Invalid Batter y

Un able to Charge

, take the following

steps:

•

Remove the battery and inspect it to confirm that it has a “Motorola Original”

hologram;

•

If there is no hologram, the battery is not a Motorola battery;

•

If there is a hologram, replace the battery and retry charging it;

•

If the message remains, contact a Motorola Authorized Service Center.

Important:

Motorola’s warranty does not cover damage to the phone caused by non-

Motorola batteries and/or chargers.

Warning:

Use of a non-Motorola battery or charger may present a risk of fire, explosion,

leakage, or other hazard.

PROPER AND SAFE BATTERY DISPOSAL AND RECYCLING

Proper battery disposal is not only important for safety, it benefits the environment.

Consumers may recycle their used batteries in many retail or service provider locations.

Additional information on proper disposal and recycling may be found on the Web:

• www.motorola.com/recycling

• www.rbrc.org/call2recycle/

(in English only)

Disposal: Promptly dispose of used batteries in accordance

with local regulations. Contact your local recycling center or

national recycling organizations for more information on how

to dispose of batteries.

Warning:

Never dispose of batteries in a fire because they may explode.

service & repairs

If you have questions or need assistance, we're here to help.

Go to

www.motorola.com/support

, where you can select from a number of customer

care options. You can also contact the Motorola Customer Support Center at 1-800-331-

6456 (United States), 1-888-390-6456 (TTY/TDD United States for hearing impaired), or 1-

800-461-4575 (Canada).

Specific Absorption Rate Data

SAR Data

This model wireless phone meets the government’s requirements for exposure to

radio waves.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured

not to exceed limits for exposure to radio frequency (RF) energy set by the Federal

Communications Commission (FCC) of the U.S. Government and by the Canadian

regulatory authorities. These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines are based on

standards that were developed by independent scientific organizations through periodic

and thorough evaluation of scientific studies. The standards include a substantial safety

margin designed to assure the safety of all persons, regardless of age or health.

The exposure standard for wireless mobile phones employs a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian

regulatory authorities is 1.6 W/kg.

Tests for SAR are conducted using standard operating

positions accepted by the FCC and by Industry Canada with the phone transmitting at its

highest certified power level in all tested frequency bands. Although the SAR is determined

at the highest certified power level, the actual SAR level of the phone while operating can

be well below the maximum value. This is because the phone is designed to operate at

multiple power levels so as to use only the power required to reach the network. In general,

the closer you are to a wireless base station, the lower the power output.

Before a phone model is available for sale to the public in the U.S. and

Canada, it must be tested and certified to the FCC and Industry Canada

that it does not exceed the limit established by each government for safe

exposure. The tests are performed in positions and locations (e.g., at the

ear and worn on the body) reported to the FCC and available for review by

Industry Canada. The highest SAR value for this model phone when

tested for use at the ear is 1.28 W/kg, and when worn on the body, as

described in this user guide, is 1.32 W/kg. The SAR value for this product

in its data transmission mode (body-worn use) is 0.73 W/kg. (Body-worn

measurements differ among phone models, depending upon available

accessories and regulatory requirements).

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the governmental requirements for safe exposure. Please note that

improvements to this product model could cause differences in the SAR value for later

products; in all cases, products are designed to be within the guidelines.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular

Telecommunications & Internet Association (CTIA) Web site:

http://www.phonefacts.net

or the Canadian Wireless Telecommunications Association (CWTA) Web site:

http://www.cwta.ca

1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)

averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in measurements.

2 The SAR information includes the Motorola testing protocol, assessment procedure, and measurement

uncertainty range for this product.

European Union Directives Conformance Statement

EU Co nformance

Hereby, Motorola declares that this product is in compliance with:

•

The essential requirements and other relevant provisions of Directive

1999/5/EC

•

All other relevant EU Directives

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to

R&TTE Directive) at

www.motorola.com/rtte

. To find your DoC, enter the Product

Approval Number from your product’s label in the “Search” bar on the Web site.

Safety and General Information

Safety I nformati on

This section contains important information on the safe and efficient operation of

your mobile device. Read this information before using your mobile device.

Exposure to Radio Frequency (RF) Energy

Your mobile device contains a transmitter and receiver. When it is ON, it receives and

transmits RF energy. When you communicate with your mobile device, the system handling

your call controls the power level at which your mobile device transmits.

Your Motorola mobile device is designed to comply with local regulatory requirements in

your country concerning exposure of human beings to RF energy.

Operational Precautions

For optimal mobile device performance, and to be sure that human exposure to RF energy

does not exceed the guidelines set forth in the relevant standards, always follow these

instructions and precautions.

0168

Product

Approval

Number

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Motorola W230a User's Guide Page 6

Comments to this Manuals

Related products and manuals for Mobile phones Motorola W230a