Motorola i700plus User Manual download pdf (Page 58)

www.mot.com/iDEN

Desktop Dual-Pocket Charger

The NTN1690 Desktop Dual-Pocket Charger charges Motorola authorized

batteries, as listed on Page 55, for the i700plus phone.

NOTE: The Desktop Dual-Pocket Charger should only be powered by the

included Rapid Power Supply. The Charger will flash both LEDs red if

the Standard Travel Charger is attached.

Figure 3. Desktop Dual-Pocket Charger

Charging a battery:

1. Insert the power supply’s DC jack plug into the DC jack receptacle on the

back of the Charger. Use only with the Motorola rapid charger included

with your Desktop Charger package.

2. Plug the power supply end of the power-supply cord into any standard AC

outlet. The Charger performs a quick power-up

self-test during which both LED indicators flash green once to indicate a

successful power-up.

3. Attach a battery to your i700plus phone. Place the i700plus phone onto the

pin connector located in the charger’s front pocket.

Data Operation

1. Insert the round end of the iDEN Data Cable (NKN6522) into the data

cable receptacle located on the back of the charger, with the Motorola logo

facing upwards.

2. Connect the opposite end of the data cable to the PC.

NOTE: Charging times may vary when performing data operations.

Data cable receptacle

(DC jack)

Rear pocket

Front pocket

Pin connector

LED indicators

Power supply cord receptacle

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

No comments

Motorola i700plus User Manual Page 58