11
Installation
Note:
Not all vehicle entertainment systems offer a stereo
auxiliary audio input. In some cases, if your system does
not support this input, one may be created using an adapter
from a third-party vendor.
1
Connect an RCA cable (not supplied) to connector E on
the ISO cable.
2
Connect the other connectors on the RCA cable to the
vehicle entertainment system’s Auxiliary input.
3
From the Installer menu, set the Line Out parameter to
ON (see “Set install preferences” on page 11 for
details).
Set install preferences
1
Turn off your vehicle’s ignition.
2
Turn on your vehicle’s ignition while pressing and
holding the Green button for at least 5 seconds.
Note:
See page 13 for location of buttons and knobs
on UIM.
3
Use the scroll knob to view and change settings.
4
Turn vehicle’s ignition off and on to store settings.
Setting...
Language set language displayed on the UIM.
Display
Orientation
set the display orientation for left- or
right-hand operation.
Line Out set to ON when using an auxiliary
input to your vehicle entertainment
system for music.
Privacy Mute set whether to unmute the vehicle
entertainment system when a call is
switched to privacy mode.
Install Test test and verify:
ignition source
left-side speakers
right-side speakers
auxiliary input to vehicle
entertainment system (if used).
Factory
Reset
reset all settings back to standard
default factory settings
About list car kit’s software version
Comments to this Manuals