Motorola MC55N0 User's Guide download pdf (Page 75)

Using the MC55 2 - 39

Figure 2-28

Pick List Mode with Multiple Bar Codes in Aiming Pattern

4. Release the scan button.

Using the RS507 Hands-free Imager

An RS507 Hands-free Imager can be used with the MC55 to capture bar code data.

To set up the RS507:

1. Tap Start > Programs > BTScannerCtlPanel icon.

2. If required, select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.

3. Tap Save and Exit.

4. Tap Start > Programs > BD Address icon. A bar code displays.

5. Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the MC55. If required,

enter PIN (12345).

Refer to the RS507 Hands-free Imager Product Reference Guide for more information.

Digital Camera Scanning

1. Ensure that a scan-enabled application is loaded on the MC55.

2. Aim the camera lens on the back of the MC55 at a bar code.

3. Press and hold the scan button. A preview window appears on the display window with a red aiming reticle in

the center. The Scan/Decode LED lights red to indicate that scanning is in process.

Decoded Not Decoded

NOTE Imager decoding usually occurs instantaneously. The MC55 repeats the steps required to take a digital

picture (image) of a poor or difficult bar code as long as the scan button remains pressed.

NOTE OEM version 02.35.000 or higher is required.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 243 244

No comments

Motorola MC55N0 User's Guide Page 75