Motorola MC55N0 Specifications download pdf (Page 45)

Accessories 2 - 17

VCD5500 Vehicle Cradle

This section describes how to set up and use a VCD5500 vehicle cradle with the MC55.

Once installed in a vehicle, the cradle:

•

holds the MC55 securely in place

•

provides power for operating the MC55

•

re-charges the battery in the MC55.

Requirements

For mounting:

•

four #8-32 self-locking nuts

•

four #8 washers

•

a drill with a #6 drill bit (.204”).

For power connection:

•

power input cable (included), p/n 25-61987-01R

•

UL Listed in-line fuse rated 250V, 5A (included), must be used if not connecting to vehicle’s fuse panel

•

in-line fuse holder (included), must be used if not connecting to vehicle’s fuse panel.

Connector Pin-Outs

Mounting the Cradle

Table 2-3

Power Input Cable

Pin Signal

1 Chassis ground (Black Wire)

2 Chassis ground (Bare Wire)

3 V+ (Red Wire)

4 V+ (Red Wire)

Connector on Power Cable

CAUTION ROAD SAFETY - Do not use the MC55 while driving. Park the vehicle first. Always ensure the

MC55 is fully inserted into the cradle. Do not place it on the seat or where it can break loose in a

collision or sudden stop. Lack of proper insertion may result in property damage or personal injury.

Motorola, Inc. is not responsible for any loss resulting from the use of the products while driving.

Remember: Safety comes first.

CAUTION Only mount the Vehicle Cradle in a vertical position with the release level at the top or in a horizontal

position with the MC55 display facing up. Never mount the vehicle cradle on the side or upside down or

on a wall that can be subject to impact or collision of greater than 40Gs, in accordance with SAE J1455

Section 4.10.3.5

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 125 126

Comments to this Manuals

No comments

Motorola MC55N0 Specifications Page 45

Comments to this Manuals

Related products and manuals for Handheld mobile computers Motorola MC55N0