Motorola NVG510 User Manual download pdf (Page 11)

Next we will enter the ports we need available for this rule or application.

Page 11

1. Give it an application Name

2. Select TCP or UDP

3. Enter the port range – I typically repeat

the port if single. NOTE – Although you

could specify 0 to 65000 or the highest

port number to achieve an effective

ANY ANY – the Pace device will not

allow you to save it in that manner.

You will need to leave some for its own

use. So you will need to break it up

into 2 or more and leave some available

for the RG’s own use.

4. Protocol timeout can be left for default.

5. Map to Host Port can be left for default

6. Application type is to let the RG know if

the port is for a particular kind of

service that it needs to handle

separately from its own services. Some

of those listed are for DNS, SIP, FTP

and few others.

7. Click Add to List

8. The area under Definition List will list

the sub rules you have Added for this

App.

9. Repeat for each port / port range

needed.

So you would have 1 rule for each port

you need in particular for traffic that is

or could be initiated remotely and for

each port as separate rule for TCP and

UDP as needed.

Once you have added all of them click

the back button. This will save the

application definition with all entries in

this case to the name you gave it.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Motorola NVG510 User Manual Page 11