Motorola MPMC101 Service Manual download pdf (Page 32)

2-8

Installation

Installing the AIX Driver

The NCR53C825 SCSI-2 controller requires a wide SCSI controller

AIX driver. If the carrier board does not have an NCR53C825 SCSI-

2 controller on board, install and configure the AIX driver per the

instructions in Chapter 3.

You do not need to install the AIX driver if the carrier board has an

NCR53C825 SCSI-2 controller, or if the MPMC101/MPMC102 is

installed in the system when AIX is installed and configured. In

these situations, the wide SCSI controller driver is installed

automatically during Initial Program Load (IPL).

Conﬁguring the SCSI Devices

Configure the devices with System Management Integration Tool

(SMIT). Use the following command to list the SCSI disk device

names:

lsdev -Cc disk | grep -i scsi

This indicates all SCSI disks found, not just the new ones. The new

devices are listed as Òdefined.Ó However, they are not ÒavailableÓ

until you configure the logical volumes and volume groups, and

create and mount the file systems.

Refer to the AIX System AdministratorÕs documentation for more

information on configuring the driver and peripheral devices.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

No comments

Motorola MPMC101 Service Manual Page 32