Motorola CLEARTONE CM5000 User's Guide download pdf (Page 61)

The Menu

4. In the List Optns sub-menu, scroll to the required option

and press Select.

• Rename the active scan list. Enter a new name (alias)

and press Ok. The display shows the new setting.

•Check

the capacity of the active scan list (number of

groups stored in the list).

•To Clear all groups from the selected scan list, press

Yes. You will be prompted to remove all groups from the

selected scan list.

• Add a group to the selected scan list. Every added

group (including a favourite group) comes with its folder,

its name or number, and its priority (if pre-programmed).

> To select a folder, scroll through the folder list. The list

does not show folders whose groups are fully used in

the selected scan list. Press Ok to select a folder.

> To select a group, scroll through the group list within

the selected folder. The list shows groups that are not

in the selected scan list. Press Ok

> To set a priority to a group, scroll through the priority

list: high, medium, or low.

A call from a high priority group will interrupt an on-

going call with a medium and low priority.

A call from a medium priority group will interrupt an

on-going call with a low priority.

A call from a low priority group will not interrupt any

on-going call.

• Edit

the scan list groups.

> Scroll to the group you wish to remove from the

selected scan list, and press Delete

. You will be

prompted to remove the selected group. After a few

seconds, the display shows the updated scan list.

> To change the group priority, press

Priority. Scroll to

the selected priority and press Select

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 101 102

No comments

Motorola CLEARTONE CM5000 User's Guide Page 61