Motorola Symbol DS6878 Specifications download pdf (Page 8)

8 Symbol CR0078-P Cradles

Charging the Scanner Battery in the Cradle

To charge the scanner battery, place the scanner in the cradle (see Inserting the

Scanner in the Cradle on page 6). The battery begins charging when the scanner

LED indicator turns solid green. A complete charge of a fully discharged battery

can take up to three hours.

LED Charging Indications

When powered up, the cradle LED is always green. Refer to the Symbol DS6878

Product Reference Guide, p/n 72-131700-xx for scanner LED indications.

Page Button

The page button is a sensor that, when touched causes paired scanners to emit a

beeping sequence. The default is Disable Page Button.

1. Place your finger over the button and hold the button down for approximately 1

second.

2. The cradle LED will turn blue and any paired scanners will beep five times. If

multiple scanners are paired to the cradle, all the scanners will beep five times.

3. Repeat as necessary.

Scan one of the following bar codes to enable or disable this feature.

*Disable Page Button

Enable Page Button

NOTE Scanners out of radio range will not beep when paged. Refer to

the Symbol DS6878 Product Reference Guide, p/n 72-131700-xx

for more information.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Motorola Symbol DS6878 Specifications Page 8