Motorola STARLINE SERIES Operations Instructions download pdf (Page 14)

Overview 2-3

BLE*/* Installation and Operation Manual

Housing

The BLE*/* is furnished in a BLE-HSG/15 aluminum housing that protects the electronics from

weather and dissipates internally generated heat.

Figure 2-3 illustrates the BLE-HSG/15 housing and provides its dimensions:

Figure 2-3

BLE-HSG/15 housing and dimensions

10.6

8.0

4.7

Coaxial cable connections to the housing are made using conventional 5/8 inch × 24 threads

per-inch stinger-type connectors. Four port plugs in the cover enable access to internal test

points without opening the housing.

The BLE-HSG/15 differs from the housing of the 10A BLE (model BLE-75SH and BLE-75JH)

and the JLX series of line extenders. However, you can upgrade the 10A BLE and the JLX

series of line extenders to the 15A BLE*/* using the existing housing. To upgrade from 10A to

15A, use the BLE-15A platform assembly kit (P/N 951941-006-00). The BLE-15A kit contains

15A platform assemblies. As an alternative to the kit, you can order the current BLE*/*

electronics module configured as a 10A unit (see Fig.2-2 BLE*/* Configurator, AC Current

Capability).

Two messenger clamps are located in the side of the housing (Figure 2-5) and are secured with

5/16 inch × 24 threads-per-inch stainless steel bolts. The bottom of the housing also contains two

5/16 × 24 threaded holes located on the vertical center-line separated by four inches

center-to-center. Use these holes and the bolts from the messenger clamps for pedestal and

surface-mounting installations.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

No comments

Motorola STARLINE SERIES Operations Instructions Page 14