Programming Model
http://www.mcg.mot.com/literature 3-45
3
signal is sent to the local bus. Note that the Version
Register bit V1 must be set to a 1 to enable the MC2 chip
access timer (i.e., it must be a "No VMEbus Interface"
option).
08 µs
164 µs
2256 µs
3 The timer is disabled.
DRAM Control Register
This register controls the parity checking mode and DRAM enable for
non-ECC applications.
RAMEN This bit enables the access of the DRAM. The DRAM
should be enabled after the DRAM Space Base Address
Register is enabled and the ROM0 bit has been cleared.
The DRAM Space Base Address Register is located at
$FFF42020 bits 31 - 16 and the ROM0 bit is located at
$FFF42040 bit 20.
ADR/SIZ $FFF42048 (8 bits)
BIT 31 30 29 28 27 26 25 24
NAME WWP PARINT PAREN RAMEN
OPER R/W R/W R/W R/W R/W R/W R/W R/W
RESET 00000 PL0 PL0 PL0 PL
Comments to this Manuals